starter.sh not executing on PI 3B

[OutagesIO_Support]

Hi,

Which version specifically did you download from the app site?
Can you share the file name, please?

Also, can you show line 60 in the script?

[Roblazo]

I selected de version "Raspberry, Pi 3B+, 64 bits".
Line 60 states: $STARTING_FOLDER/$OTM_BINARY &

Thanks

[OutagesIO_Support]

And once the script runs, what do you see in the /otm directory?
Do you see the agent binary that's been downloaded?
Can you run 'ls -la' in the /otm directory after the script runs and show the results?

Also, did you create the /etc/agentid file with the required contents?

[Roblazo]

pi@raspberrypi:~ $ ls -la /otm
total 252
drwxrwxrwx 2 root root 4096 dic 26 10:06 .
drwxr-xr-x 24 root root 4096 dic 24 15:33 ..
-rwxr-xr-x 1 root root 239704 dic 25 16:40 otm_binary
-rw-r--r-- 1 root root 490 dic 25 16:40 otminfo.log
-rwxr-xr-x 1 root root 2897 dic 24 15:39 starter.sh

Yes, I created /etc/agentid and I've also updated it whenever I've generated a new version of the agent and starter.sh to download.

One point: my raspi is set to UTC time (not to the the local one)

Regards

[OutagesIO_Support]

So we can confirm it's downloading the binary but not able to start it.
Try manually starting it then go look at your dashboard to see if the heartbeat goes green.

chmod +x otm_binary
./otm_binary

or 'sh otm_binary'

I'm not sure which right now.

[Roblazo]

No way.
After generating a new agent and installing everithing from scratch. I esecute manually the /otm/otm_binay and this is what I get:
pi@raspberrypi:~ $ sudo sh /otm/otm_binary
/otm/otm_binary: 1: /otm/otm_binary: cannot open �T���t������@@������|BE���4��WqXvT<�Y�y
L!~S��O: No such file hZ�l*-�p-,
/otm/otm_binary: 1: /otm/otm_binary: ELF��n@X�@8: not found
/otm/otm_binary: 2: /otm/otm_binary: �@: not found
/otm/otm_binary: 3: /otm/otm_binary: T
��: not found
/otm/otm_binary: 3: /otm/otm_binary: H���gF
M: not found
/otm/otm_binary: 5: /otm/otm_binary: �v5���%
8
%����Z����: not found
/otm/otm_binary: 7: /otm/otm_binary: ��
�: not found
/otm/otm_binary: 7: /otm/otm_binary: �������: not found
/otm/otm_binary: 24: /otm/otm_binary: Syntax error: "(" unexpected

The agent in the dashboard does not change (staus is 'created')

[OutagesIO_Support]

What is the OS and is it 32bit or 64bit?

[Roblazo]

I'm afraid is 32 bits

pi@raspberrypi:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 10 (buster)
Release: 10
Codename: buster

pi@raspberrypi:~ $ lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Vendor ID: ARM
Model: 4
Model name: Cortex-A53
Stepping: r0p4
CPU max MHz: 1400,0000
CPU min MHz: 600,0000
BogoMIPS: 38.40
Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32

pi@raspberrypi:~ $ getconf LONG_BIT
32

Which type of platfrom should I select? Debian 7?

[OutagesIO_Support]

So the problem for you is that your device is 32bit and we only support 64bit at this point. We used to support 32bit but almost everything is now 64bit.

[Roblazo]

what a waste of time for all of us.
Pls, remove all my data from your DDBB.

[OutagesIO_Support]

Sorry, but almost all hardware has gone to 64bit. We supported 32bit for a long time but there are costs associated with maintaining so many versions.

We clearly show the bit version in the available agent list of downloads as well to ensure that you're not wasting your time. Sorry that you didn't notice that.

We were happy to help you but as you've asked, your account and data have been removed.

Thanks for trying our service, sorry it didn't work out.