Track Internet disconnections, provider outages with historical data, and automated speed testing.
For Windows, Linux, ARM64, ARMa7. Learn more by visiting www.outagesio.com
Notice: If you created an account on app.outagesio.com, simply use the same credentials to log in here.
Setup error
-
We are based in Arizona so do understand what you are talking about :).
The hardware agent sounds like it will help you with this in an ongoing way and give you better information than what you are getting now.
You'll know when you are experiencing outages vs disconnections which could be another problem, usually signal levels, something failing etc.
I'm very sure you'll find the hardware agent very useful for some time to come because you can keep it on 24/7 so it will never miss anything which means it can also build up trends and historical information.
Most people complain to their providers after the problems have started meaning they don't have any evidence which makes it hard for the provider to fix anything. By constantly monitoring, you'll always have information before, during and after problems.
The kind of setup you are describing is similar to a community we are trying to help where all of customers are in a mesh type wireless network with a main antenna on a nearby mountain. The customers which cannot 'see' the antenna directly are set up as a mesh, using another customers antenna to reach the main antenna.
Your observation of what appears to be sharing bandwidth could be interesting. Is it possible that the main antenna's bandwidth is provided by the cell service or a relay on that same antenna? Meaning, it is somewhat possible that your Internet service is actually coming from a nearby cellular service. Maybe the Internet service you are buying from this other company is actually being provided by the local cell provider.
Just guessing of course :).
-
I wasn't sure where you were. I do remember seeing AZ when I got the hardware agent.
Yes, the constant monitoring will be a plus. And not only dropped/outages but durations.
I don't think the main antennas are provided by cell service. We have pretty (or used to) limited cell service here – though I did notice on the Visionary website (www.vcn.com) that they say they offer "Internet + phone" (phone presumably VOIP) for $30 and up. They also say they have some DSL, fiber, T1 lines in their mix. I do remember that the previous company said they had a T1 line though it was about 60 miles to the west of Pagosa Springs.
But I'm unsure of their wireless technology. You would think if they were doing some partner with cell service that they would not need relay type towers. Of course, in the 17 years we have lived here, cell service has gotten better though there are still spotty areas. FYI, I just did a speed test and about 5 MPBS download and I think 2 upload. Which is better than nothing. I think we're paying for double that.
-
Amazing what a phone call does. Internet has been up since about 10:30 yesterday (Friday, Nov 13) morning. Such a relief.
I think they can do something in their control room - happened before when we were having outages every 20 minutes like clockwork. Possibly they can drive to the relay tower, but I don't think so. (Maybe ATV)
Will either of the devices, software or hardware, detect a failing router?
I've done speed tests with their speedtest widget – we were actually getting what we pay for delivered back in May.
-
Will either of the devices, software or hardware, detect a failing router?
Nice to hear it's working again.
The agents cannot know if something is failing but there is a way to know when it's not actually IP problems.
If you see disconnections but no outage, it usually indicates that something is failing or signal levels.
In other words, when you have IP outages, the agent will always report those once it comes back online but there is no test it can do to know if there is a cable, interface or router failing. If you see lots of disconnections, you could check your devices signal levels to see if they were low on or around disconnected times.
Several times, we've been able to tell a provider that a certain device was going to fail because we could see hundreds to thousands of either short outages or disconnections. Where there are many short interruptions, it usually means something is failing.
-
As an update, the developer does see something interesting in another log that was posted in another question.
We have not been able to replicate this as the agent is still installing on some windows and not others. Every last machine we've tried worked.
We need to find one that doesn't so the developer can run some tests. Once we do that, we should be able to fix this random problem.
-
> As an update, the developer does see something interesting in another log that was posted in another question.
Actually, that looks like the same or similar error to what I was getting – namely the VC140 package will not install. Not sure what window error (i.e. if already there or just install failed) the person is getting. At least in one or more of the logs I posted/shared with dropbox.
The very first one I tried 10/27 had that error:
[0CA0:4054][2020-10-27T09:47:10]i301: Applying execute package: vc140, action: Install, path: C:\ProgramData\Package Cache\3B32BC4B8DEC32FD52A8F4BDA5648C3A8D999D7C\vc_redist_V140.x64.exe, arguments: '"C:\ProgramData\Package Cache\3B32BC4B8DEC32FD52A8F4BDA5648C3A8D999D7C\vc_redist_V140.x64.exe" /install /passive /quiet /norestart'
[0CA0:4054][2020-10-27T09:47:15]e000: Error 0x80070666: Process returned error: 0x666
[0CA0:4054][2020-10-27T09:47:15]e000: Error 0x80070666: Failed to execute EXE package.
[1DA0:165C][2020-10-27T09:47:15]e000: Error 0x80070666: Failed to configure per-machine EXE package.
[1DA0:165C][2020-10-27T09:47:15]i319: Applied execute package: vc140, result: 0x80070666, restart: None
[1DA0:165C][2020-10-27T09:47:15]e000: Error 0x80070666: Failed to execute EXE package.
-
Still don't have the hardware widget. However, we haven't had a significant number of outages since I got off the phone with the provider on Friday.
However the speedtest was approximately half of what we're paying for so I called again. This time, he downloaded a new firmware to our "radio" and said he had set the priority to "high" rather than "basic". Hmmmm
-
As an update, the Windows developer is working on a fix. We were finally able to isolate the problem and a fix should be out soon.
It will be advertised here in the forums.
I think I've seen in the news that deliveries are sometimes very backed up right now. Maybe this is especially true to more rural areas.
It should come in any time now.
-
Happy to hear you have your new hardware agent.
You should have received an email when you ordered which contains information on how to connect it and activate it to your account.
Maybe you've already done that. Let us know if you have any problems.
-
The update to fix the Windows installer problem has been released. Simply create a new software agent which will give the download to the new version.
-
O OutagesIO_Support marked this topic as a question on
-
O OutagesIO_Support has marked this topic as solved on